Stainless Steel V4 Borwell Submersible Pumps (Oil Filled) 100mm
OSWAL submersible pumps & motors are well known for its quality, Reliability & excellence for all type of service purpose. OSWAL submersible pumps & motors are manufactured under supervision of highly qualified technical team with a stage wise rigid inspection procedure under TQM concepts.
Application of Bore well submersible pumps are in Hospitals, Water circulation systems, Water supply systems of Government, Irrigation, Farms & Drip & sprinkler irrigation, Gardening, Nurseries, Domestic water supply, Multi-storey Building, Industries & Hotels.
OSWAL oil filled pumps sets are highly efficient, Low power consumption, complete absence of suction trouble. Maintenance free operation due to water lubricating bearings, vibration free & noiseless operation and world class design gives higher discharge & high efficiency. Easily repairable & dismountable.
OSWAL oil filled submersible motors are easily rewind able & repairable. Motor filled with food grade cooling oil. Oil filled motor consist of ball bearing to minimize the frictional losses & to increase the efficiency. Oil used as a coolant and work as lubricant in motor so life of motor is increases due to less wear & tear. The basic function of coolant is to lubricant bearing of rotor, removing heat generated in motor and oil is working as a coolant for smooth operation of pump.
OSWAL BORE WELL SUBMERSIBLE PUMP confirm to IS : 8034.
Mounting dimension of 4” pumps sets are as per NEMA standard
| Specification : | ||
| Power Range | 0.5 HP - 5.0 HP in 1 Phase 0.5 HP - 10 HP in 3 Phase |
|
| Version | 220-240V 50 Hz, A.G.-1 Phase, 350&40V — 3 Phase |
|
| Speed | 2880 rpm. | |
| Discharge Range | 23 - 250 in 1 Phase 23 — 250 In 3 Phase |
|
| Head Range | 42 — 200 mtr In 1 Phase 42 — 350 mtr in 3 Phese |
|
| Outlet size | 25, 32, 40 & 50 mm | |
| Degree of Protection | IP 68 | |
| Maximum Outer diameter | 98 mm | |
| Duty | S1 (Continuous) | |
| Method of starting | Capacitor start and run (CSR) in oil filled In 1 Phase /DOL in 3 Phase | |
| Mounting Standard | As per NEMA | |
| Material of Construction – Pump | ||
| NRV Housing | Stainless Steel | |
| Check Valve | Stainless Steel | |
| Check Valve Sheet | NBR | |
| Impeller | Stainless Steel | |
| Bowl | Stainless Steel | |
| Pump Sheft | SS 431 | |
| Suction inter Connector | Stainless Steel | |
| Coupling | SS 410 | |
| Material of Construction – Motor | ||
| Upper, Lower Housing & Motor Base | Cast Iron / Stainless Steel | |
| Stator Shell | Cast Iron | |
| Shaft | Stainless Steel | |
| Bearing | Laaded Branze in watar filled Anti frictianal deep groove ball bearlng in oil filled | |
| Thrust Set | Carbon Vis SS in water filled | |
| Application in: • Watar supply fram bore well • AC and solar energy compatible • Municipal & Irrigation purposeL • Water 8upply in commercial establiehmente • Small farms, gardening & nursariee. |
||